LS5900
Similar to Line Lazzer 5900
LS3400
Similar to Line Lazzer 3400
LS8400
Perfect for line making, remaking and maintaining lines and markings on communal areas, roads, parking areas, sports areas, airports, storage, halls, etc.
LS4000
Hand-pushed cold paint road marking machine is the common equipment for road marking at room temperature and is used for straight line, dotted line, induced lines, zebra crossing, text, graphics in the field of roads, urban areas, squares,car parks, airports and so on.
TSA-Z
Vibration lines are now widely used all around the world. So we design this TSA-Z automatic convex road marking machine. This raised line makes the drivers feel more obvious. In addition to the highways edge lines, the entrance ramps now the deceleration zones nearby school, the blind roads, the edge lines of city streets, stop lines, etc have all used convex lines, to remind the driver to slow down and reduce traffic accidents.
TPMA-Z
Vibration lines are now widely used all around the world. So we design this TPMA-Z automatic convex road marking machine. This raised line makes the drivers feel more obvious. In addition to the highways edge lines, the entrance ramps now the deceleration zones nearby school, the blind roads, the edge lines of city streets, stop lines, etc have all used convex lines, to remind the driver to slow down and reduce traffic accidents.
TMA-F
Thermoplastic applicator is of simple structure, easy operation, fast speed, regular line and even application integrating the advantages of domestic and overseas similar device.
DCPH-1000
The hydraulic double cylinder thermoplastic pre-heater is the major equipment used for melting hot melt paint. After four generations of hot melt kettle innovation
DCPH-400S
This hot melt kettle of this model is only 1.26M high, which can be transported into underground parking lot carried by trucks. During the underground parking lots thermoplastic marking work, this type of pre-heater can continuously melt coating preparing for the hot melt applicator. Greatly improve the efficiency of the underground parking lot construction.
TMR-30
Miling-planning type remover is small road marking to remove the old thermoplastic marking line. The machine adopts unique function of chip removal and can automatically forward.Fast speed, small vibration, no noise, less damage to the ground are its advantages.
PSM-J
Automatic pressure primer spraying machine is an auxiliary equipment in the construction of thermoplastic road marking. It is used to spray primer on the road surface. The machine's function is to be evenly spraying primer on the ground, enhance the adhesion of paint and ground.
SCM-1
It is mainly used to remove dirt, mud, dust and the old cold paint line on the road surface. It will replace the manual cleaning, saving manpower, greatly enhance the construction efficiency.
HPCM-150
It can be for a variety of road surfaces and metal processing. It has advantages of high efficiency, stable performance, complete clean, with small damage on the ground.